MAC NEW HARD DRIVE DISK UTILTY UPGRADE
MAC NEW HARD DRIVE DISK UTILTY MAC

Hold the keys down until the computer restarts and you hear the startup sound for the third time.You must press this key combination before the gray screen appears. Press and hold the Command-Option-P-R keys.You will need to hold these keys down simultaneously in step 4. Locate the following keys on the keyboard: Command, Option, P, and R.Press the power button to turn on the computer.Press and hold the power button for 5 seconds.Unplug the computer's power cord and all peripherals.With the new hard drive still installed, attempt an SMC reset as well as a PRAM/NVRAM reset.Reinstall the new hard drive and try again.Connect the new hard drive to another computer (if available, either by installing or using a SATA to USB/FW adapter) - this will let you know if the new drive is functioning.Reinstall the original hard drive and verify that it shows up in Disk Utility - this will let you know that the SATA cables and connections on the logic board are functioning.This advice puts people like myself, who have had long histories with hard drives and understand how they delete databy leaving it around and just losing track of iton high alert. Click 'View' on Disk Utility and select 'Show All Devices' from the menu bar. Go to Applications > Utilities > Select 'Disk Utilities'. Connect your new hard drive or SSD to your computer as an external disk.

MAC NEW HARD DRIVE DISK UTILTY MAC

Using Mac Disk Utility to Clone a Hard Drive: Step 1.

MAC NEW HARD DRIVE DISK UTILTY UPGRADE

It would be odd to see that but it is certainly possible. Apple recommends that, if you’re giving away or selling your Mac, you should simply erase it with Disk Utility first. Clone and Upgrade Mac Hard Drive to SSD/HDD. When a drive will not tell Disk Utility its Make&Model and a reasonable, non-zero capacity/size, it is either cabled incorrectly, lost power, or died. So you have no drives showing, and are not using High Sierra Recovery HD from a drive. Instead, right-click the file WD Drive Utilities Installer application and select the Show Package Contents. Was the hard drive simply an upgrade or is it to replace a failed/failing hard drive? It's possible that the new hard drive is defective. Size of 2.1GB may be just a pointer to Internet Recovery, from your Mac's ROM. Double-click the WDUtilitiesInstallerforMac211100.dmg to create the WD Drive Utilities disk image on your desktop. With that in mind I would be troubleshooting the component itself. This hard drive shows as using the SATA II specification, which is backwards compatible with the SATA I specification. The early Intel iMacs used the SATA I specification of 1.5Gbit/s. This hard drive SHOULD be compatible with your iMac assuming you do have a 17' Intel iMac.

Mac new hard drive disk utilty